The air-cooled Porsche 911s with dry sump lubrication were equipped with a larger volume of motor oil compared to the water-cooled variants. The air-cooled models typically had a total oil capacity of around 10-12 quarts, while the water-cooled versions had a smaller oil capacity of around 8-9 quarts. This larger oil capacity in the air-cooled models helped to ensure better cooling and lubrication for the engine, especially during high-performance driving. **

Dry sump lubrication is advantageous for lowered cars because it eliminates the need for an oil pan, which is typically the lowest point of the engine and susceptible to damage from speed bumps, potholes, or other road hazards. By removing the oil pan, the risk of it being damaged is significantly reduced, allowing lowered cars to navigate uneven roads without worrying about oil pan damage. Additionally, dry sump systems provide better oil control and lubrication efficiency, which can be beneficial for high-performance engines often found in lowered cars. **

The choice between furniture oil and furniture polish depends on the specific needs of the furniture. Furniture oil is better for nourishing and protecting wood, as it penetrates the surface to condition and enhance the natural beauty of the wood. On the other hand, furniture polish is better for adding shine and luster to the surface of the furniture, as it contains ingredients that create a protective layer and provide a glossy finish. Ultimately, the best option depends on whether the furniture needs nourishment and protection (furniture oil) or a shiny finish (furniture polish). **

To oil spruce furniture, start by sanding the surface lightly to remove any rough spots. Then, use a clean cloth to apply a thin, even coat of wood oil, such as linseed oil or tung oil, to the furniture. Allow the oil to penetrate the wood for about 15-20 minutes, then wipe off any excess with a clean cloth. Let the furniture dry completely before applying a second coat if needed. This will help to nourish and protect the wood, giving it a beautiful, natural finish. **

A common question regarding wood furniture oil and varnishes that a carpenter or painter may receive is: "What is the best type of oil or varnish to use for this specific type of wood furniture?" This question typically involves considerations such as the type of wood being used, the desired finish (e.g. matte, satin, glossy), and the level of protection needed for the furniture. Carpenters and painters may also be asked about the application process, drying time, and maintenance requirements for different types of oils and varnishes. **

The most commonly recommended oil for wood is mineral oil or food-grade mineral oil. This type of oil is safe for use on cutting boards, wooden utensils, and other food-related wood items. Other options for wood oil include tung oil, linseed oil, and walnut oil, which are often used for furniture and other woodworking projects. Ultimately, the best oil for wood will depend on the specific type of wood and the intended use of the item. **

Yes, jojoba oil is good for wood. It is a natural, non-toxic oil that can be used to condition and protect wood surfaces. Jojoba oil penetrates the wood to nourish and moisturize it, helping to prevent drying, cracking, and warping. It also creates a protective barrier on the surface of the wood, helping to repel moisture and dirt. Additionally, jojoba oil is a sustainable and environmentally friendly option for wood care. **

To oil varnished wood, start by cleaning the surface with a mild detergent and water to remove any dirt or grime. Once the surface is clean and dry, apply a thin layer of wood oil using a clean, lint-free cloth, following the direction of the wood grain. Allow the oil to penetrate the wood for a few minutes, then wipe off any excess with a clean cloth. Repeat the process if necessary to achieve the desired level of sheen and protection. Finally, allow the wood to dry completely before using or applying any additional coats of oil. **